All have a 1.5 litre stainless steel tank within the chilling chamber to meet peak usage periods. This tank is fabricated for industrial grade 304 stainless steel for your piece of mind.
All refrigerant gases are non- toxic, non flammable and environmentally sympathetic. The refrigerant flow is controlled by a capillary tube, which has no moving parts. To give me maximum heat exchange a suction line is filled.
F2/F3- uses 250 gms of R134a refrigerant
F4/F5- uses 190 gms of R134a refrigerant
F10/F11- 127gms of R22 refrigerant
The bubbler is rated to supply 1.7 l.p.m. at any mains pressure between 140 and 700KPa. An automatic, self- regulating controlled is fitted to overcome varying mains pressure.
Water inlet- (½”) male B.S.P
Water outlet- 40mm female F.P.V.C. pipe
The thermostat is factory pre- set
F2/F3- ⅛ hp capacity 138 watts
F4/F5- ⅕ hp capacity 230 watts
F10/F11- ¼ hp capacity 430 watts
The condenser is of copper tube and expanded aluminium fin
240 volts, 50 HZ. A 2 meter house cable and 3 pin plug is supplied.
Water inlet- 26.7℃
Water outlet- 10℃
Ambient air- 32.2℃
F2/F3- 26kgs
F4/F5- 28kgs
F10/F11- 30kgs
Width- 350mm container capacity
Depth- 350mm 20ft- 192 units
Height- 1100mm 40ft- 396 units
Twelve months comprehensive coverage. Five years for compressor replacement.
Selection Chart |
|||||||
Cabinet |
Filtered |
10 Litres per hour |
19 Litres Per Hour |
26 Litres Per Hour |
|||
| 0- 15 People * | 15- 40 People * | 40- 80 People * | |||||
| Bubbler | Bubbler & Glass Filler | Bubbler | Bubbler & Glass Filler | Bubbler | Bubbler & Glass Filler | ||
| Colour- Bond | No | F2 | F3 | F4 | F5 | F10 | F11 |
| Yes | F2F | F3F | F4F | F5F | F10F | F11F | |
| Stainless Steel | no | n/a | n/a | F4SS | F5SS | F10SS | F11SS |
| yes | n/a | n/a | F4SS | F5SS | F10SS | F11SS | |
| * Approximate figures only | |||||||
To order our Freestanding Water Bubbler or if you have questions for our staff, please contact us.
Contact Us
