All models have a chilled chamber to meet peak usage periods. The tanks are fabricated from hand drawn, seamless copper which is tin plated for your safety.
UB1- 0.8 litre tank, 8 litres per hour
UB2- 1.5 litre tank, 15 litres per hour
UB3- 0.8 litre tank, 8 litres per hour
All use R134a refrigerant gas which is non- toxic, non- flammable and environmentally friendly. The refrigerant flow is controlled by a capillary tube, which has no moving parts. A suction line is fitted to provide maximum heat exchange.
Water inlet- 6.2mm (¼”) OD tube
Water outlet- 6.2mm (¼”) OD tube
UB1- ⅛ hp nominal capacity
UB2- ⅕ hp nominal capacity
UB3- 1/16 hp nominal capacity
Each thermostat is factory pre- set for optimum performance.
All models are 240 volts, 50 hZ power supply and are fitted with a 2 metre house cable and 3 pin plug.
Water inlet- 26.7℃
Water outlet- 10℃
Ambient air- 32.2℃
UB1- 315mm wide x 365mm high x 415mm deep
UB2- 340mm wide x 535mm high x 440mm deep
UB3- 315mm wide x 187mm high x 415mm deep
Z-3019 glass filler for fitment to sink.
Note: It is recommended that all products must be vented to allow maximum air flow compressor. UB2 has a vent included in the carton
|Filtered||8 Litres Per Hour||15 Litres Per Hour||5 Litres Per Hour|
|5- 12 people||12- 26 people||0- 5 people|
|* Approximate figures only|