| WATER RESERVOIR |
All have a 1.5 litre stainless steel tank within the chilling chamber to meet peak usage periods. This tank is fabricated for industrial grade 304 stainless steel for your piece of mind.
|
| REFRIGERATION |
All refrigerant gases are non- toxic, non flammable and environmentally sympathetic. The refrigerant flow is controlled by a capillary tube, which has no moving parts. To give me maximum heat exchange a suction line is filled.
F2/F3- uses 250 gms of R134a refrigerant
F4/F5- uses 190 gms of R134a refrigerant
F10/F11- 127gms of R22 refrigerant
|
| WATER FLOW CONTROLS |
The bubbler is rated to supply 1.7 l.p.m. at any mains pressure between 140 and 700KPa. An automatic, self- regulating controlled is fitted to overcome varying mains pressure.
|
| WATER CONNECTIONS |
Water inlet- (½”) male B.S.P
Water outlet- 40mm female F.P.V.C. pipe
|
| TEMPERATURE CONTROL |
The thermostat is factory pre- set
|
| COMPRESSORS |
F2/F3- ⅛ hp capacity 138 watts
F4/F5- ⅕ hp capacity 230 watts
F10/F11- ¼ hp capacity 430 watts
|
| CONDENSER |
The condenser is of copper tube and expanded aluminium fin
|
| ELECTRICAL |
240 volts, 50 HZ. A 2 meter house cable and 3 pin plug is supplied.
|
| PERFORMANCE TO ARI 1010- 94 STANDARD |
Water inlet- 26.7℃
Water outlet- 10℃
Ambient air- 32.2℃
* Approximate figures only
|
| WEIGHT- PACKED |
F2/F3- 26kgs
F4/F5- 28kgs
F10/F11- 30kgs
|
| DIMENSIONS |
Width- 350mm
Depth- 350mm
Height- 1100mm
|
| WARRANTY |
Twelve months comprehensive coverage. Five years for compressor replacement.
|
