- Triple system offers triple protection against cysts chemicals and sediment
- Complete system includes installation kit
- This system meets The WaterMark specification AS/NZS 3497:1998 Amdt 1 2001 Drinking water
- Australian Made
Australian Made
The first stage is designed to remove sediments, sand, rust & scale down to 1micron, 40 times smaller than the eye can see.
Premium 0.5 micron extruded carbon block including two layers manufactured in the USA. Effectively removes/reduces aluminum, chlorine, copper, iron, lead, mercury, bacteria, cholera, cysts, cryptosporidium, E. coli bacteria, salmonella, taste & odour.
Premium coconut shell activated carbon provides great tasting drinking water.
The Filpure FLUORIDE removal cartridge employs granular mineral media that rubies and sapphires (corundum) are made from, which can effectively lower fluoride levels from 0.5 ppm to less than 0.1 ppm. It is commonly used in the water treatment industry due to its efficient fluoride removal capabilities.
For optimal performance, it is advised not to exceed the recommended flow of 0.1 GPM. This filter has a lifespan of 4500 ppm with effluent levels below 0.2 ppm – 10 ppm feed (approximately 4000 Liters).
Also available in 0.01 micron.
Aluminium, chlorine, copper, iron, lead, mercury, bacteria, cysts, cryptosporidium, taste & odour.
| Height | 320mm |
|---|---|
| Width | 430mm |
| Depth | 140mm |
| Filter cartridge replacement | It is recommended that the filter cartridge be replaced every 6-12 months according to water quality and usage. |
| Flow Rate | 3 Litres Per Minute |
| Pressure Protection Valve | Included |
| Warranty | 5 Years |
| Certification | The PU3 system meets The WaterMark specification AS/NZS 3497:1998 Amdt 1 2001 Drinking water. |
